Operation Manual

Robertson AP300X Autopilot
28 22081814H
Navigation Mode Operation
First Press
(Automatic steering by compass and Nav source input)
N
.02 Nm
Origin
Waypoint 2
OK:? Press NAV
Chg.
Brg.
WP: WP 002
094
075
If required course change
is safe, press NAV to accept
New heading accepted
automatically after
NAV/SETUP button is pressed
At the arrival of each new waypoint in a route:
Waypoint arrival zone
(determined by the navigator)
Waypoint 1
Third press
Prompt displayed to advise
required course change
N
.01 Nm
Regain manual
steering at any
time by pressing:
Refer to AUTO mode
for details on dodging
Second press
OK:? Press NAV
Chg.
Brg.
WP:WP001
135
016
Required course change
Bearing WP-WP (leg)
Waypoint Name
XTE Display
GPS1
N-HI
136 1.25 Nm
Nav. Mode, HI speed param.
Bearing and distance to WP from
present position
Nav source
XTE on WP2 track
Boat is .02 Nm to the left
of track.
NAV
SETUP
NAV
SETUP
NAV
SETUP
NAV
SETUP
STBY
OFF
Selecting a different Navigator
If you have more than one Navigation source connected to the
AP300X, you will be able to choose any for Navigation. Refer to the
User Set-up menu for details on selecting a different Navigator.