Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST

Robertson AP300X Autopilot
2 22081814H
Document revisions
Rev Date Written by Checked by Approved by
–
08.04.1994 NG TT Th.H.
A
03.05.1994 NG Th.H.
B
27.09.1994 NG Th.H.
C
24.11.1994 NG Th.H.
D
10.02.1995 NG IK Th.H.
E
06.11.1995 NG IK Th.H.
F
17.01.1996 NG Th.H.
G
28.08.1996 NG Th.H.
H
25.02.1997 NG Th.H.
Document history
Rev. Action/Changes/References
– Original issue.
A
Change of cable clamp in junction units page 71. Minor corrections in text and
displays.
B Minor corrections in text and displays. Section 1 and 3 extended. Section 4-6 added.
C Minor corrections in text page 72 and in text and diagram page 88. Table with NMEA
input-/output messages included.
D Updated spare parts list section 7.
E Page 112: Moved arrow on J3000X/J300X/J300X-40 Main PC-board to correct
EPROM. Minor corrections in text.
F Operational instructions for MSD50 installations included. Operational instructions for
dodging in NAV mode added. Minor changes in explanatory text to NAV mode
displays. Interface setup table modified. Wiring of CD100 if mounted upside down.
G R2500 substituted by R3000X on page 17, 24 and 83. Added missing words page
79. New Databox/J300X connection diagram included on page 86. Minor corrections
to other drawings on same page. IP code for J300X on page 119 corrected.
H Page 89: New cable for LF3000 included.