Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST

Robertson AP300X Autopilot
46 22081814H
INFO and POS screens
The following display is accessed from the main menu by pressing the
INFO softkey:
Position
source
(D denotes
differential GPS)
Course & speed
over ground
computed by
pos. source
Cross Track
Error
(boat 0.05Nm
to the left of
track).
MAIN
DGPS 1 POSITION
N 58°27.00'
E 05°58.30'
0.05Nm
Own ship's
present position
Bearing and distance
from present position
to the waypoint
WP - name
Track
ESC
COG : 000° SOG : 10.00Kt
POS
NAV. source: AP300DLX
WP: Buoy 4
BRG: 049° DST: 0.8 Nm
Selected NAV. source
The Latitude, Longitude, COG, SOG are values supplied from the
selected external position source. The Course Over Ground is
displayed as the Magnetic course over ground when the selected
heading sensor is a fluxgate or magnetic sensor, or is shown as the
True course when the heading sensor is selected as a gyro type. It may
be different from the instantaneous ship's heading.
By pressing the POS softkey on the WAYPOINT screen the following
display is accessed:
ESC
MAIN
GPS1 POSITION
N
E
58
27.00
05
58.30
The Latitude and Longitude are values supplied from the external
position source. The screen is very useful as a large digit position
display.