Operation Manual

Autopilot Operation
22081814H 49
WARNING ! The accuracy of current navigation systems make it possible to
automatically navigate extremely close to positions that you will
input the AP300DLX. When entering waypoints from a nautical
chart or from a position listing, select a position that is a safe
distance away from the actual location, to insure that you will
not steer directly into e.g.a selected buoy.
If you do not press ENTER within 60 seconds after naming the
waypoint, the new waypoint will not be saved.
As you continue moving, the AP300DLX will continuously calculate
the distance and bearing from the ship's current location to the
waypoint position that was retained at the instant the ADD button was
pressed.
Storing Waypoints
Flashing Cursor prompt
The next available waypoint is automatically
presented as the new waypoint.
Name the Waypoint
Adjust the Latitude value
Adjust the Longitude value
N 40°52.60'
W 72°30.15'
MAIN
GPS1 POSITION
COG : 075°M SOG : 5.00Kt
ROUTE WAYPT GOTO
SETUP
MOB - WP
TEMP - WP
Buoy - 002
XXXX - 003
XXXX - 004
XXXX - 005
XXXX - 006
XXXX - 007
XXXX - 008
XXXX - 009
Buoy32a
N 40°52.60'
E 72°30.15'
BRG: 076°M
DST: 02.00 Nm
Select WP
Selected
Waypoint
ADD
ESC
GOTO MAIN EDIT
MOB - WP
TEMP - WP
XXXX - 002
XXXX - 003
XXXX - 004
XXXX - 005
XXXX - 006
XXXX - 007
XXXX - 008
XXXX - 009
ESC MAIN
ENTER
DEL
Adding new WP
Move cursor
< or >
Change value
Press ENTER to save WP to memory
WEST
EAST
NORTH
00
PLOT
INSTR
MOB
INFO
NAV
PORT
STBD
N 40°52.60'
E 72°30.15'
BRG: 000°M
DST: 0.00 Nm
Use to select characters
for waypoint name
Robe rtson
Use to move cursor to
next line
Use the or to move
cursor to character field.