Operation Manual

Robertson AP300X Autopilot
50 22081814H
Saving Present Position to a Waypoint
The next available waypoint is
automatically presented as the
new waypoint with the ship's
position that was valid at the
time "ADD" was pressed.
N 40°52.60'
W 72°30.15'
MAIN
GPS1 POSITION
COG : 075°M SOG : 5.00Kt
ROUTE
WAYPT GOTO
SETUP
MOB - WP
TEMP - WP
Buoy - 002
XXXX - 003
XXXX - 004
XXXX - 005
XXXX - 006
XXXX - 007
XXXX - 008
XXXX - 009
Buoy32a
N 40°52.60'
E 72°30.15'
BRG: 076°M
DST: 02.00 Nm
Select WP
Selected
Waypoint
ADD
ESC
GOTO MAIN EDIT
WEST EAST
NORTH
00
PLOT
INSTR
MOB
INFO
NAV
PORT STBD
Name the waypoint
Do not change Latitude
or Longitude value
Press ENTER to save
WP to memory
MOB - WP
TEMP - WP
XXXX - 002
XXXX - 003
XXXX - 004
XXXX - 005
XXXX - 006
XXXX - 007
XXXX - 008
XXXX - 009
ESC
MAIN
ENTER
DEL
Adding new WP
Move cursor
< or >
Change value
N 40°52.60'
E 72°30.15'
BRG: °M
DST: Nm
Note ! SAVED waypoints are exactly the same as other stored waypoints, except
that the AP300DLX automatically sets the position, instead of having the
user dial in the waypoint position.