Operation Manual

Autopilot Operation
22081814H 51
Editing Waypoints
N 40°52.60'
W 72°30.15'
MAIN
GPS1 POSITION
COG : 075°M SOG : 5.00Kt
ROUTE WAYPT GOTOSETUP
MOB - WP
TEMP - WP
Buoy - 002
XXXX - 003
XXXX - 004
XXXX - 005
XXXX - 006
XXXX - 007
XXXX - 008
XXXX - 009
Buoy32a
N 40°52.60'
E 72°30.15'
BRG: °M
DST: Nm
Select WP
Selected
Waypoint
ADD
ESC
GOTO
MAIN
EDIT
WEST EAST
NORTH
00
PLOT
INSTR
MOB INFO
NAV
PORT STBD
Robertson
Waypoint Name
Waypoint Latitude
Waypoint Longitude
Press the EDIT softkey
after
pointer is set to the waypoint
that is to be edited.
To cancel editing and restore waypoint to previous name and position values before
the ENTER softkey is pressed: Press "ESC" softkey.
To delete the waypoint and store a blank waypoint back to memory:
Press "DEL" softkey.
Other Editing Options:
Editing allows you to change the Name,
Latitude or Longitude value of a waypoint.
Waypoints may be edited (changed) or
deleted (erased).
Flashing Cursor prompt
Change waypoint
name (if desired)
Adjust the Latitude value
Adjust the Longitude value
MOB - WP
TEMP - WP
ESC
MAIN ENTERDEL
Press ENTER to save WP to memory
Buoy 32a
N 40°52.60'
E 72°30.15'
BRG: 000°M
DST: 0.00 Nm
Select WP
Selected
Waypoint
Buoy - 002
XXXX - 003
XXXX - 004
XXXX - 005
XXXX - 006
XXXX - 007
XXXX - 008
XXXX - 009
Use the or to move
cursor to character field.
Use to move cursor to
next line
Use to scroll cursor
through characters
Roberts on
Turn
to change pointer
position to point at
waypoint to edit