Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST

Autopilot Operation
22081814H 55
Navigating to a Temporary waypoint
The temporary waypoint feature in the AP300DLX is a simple method
to navigate to a location without storing the location permanently.
Each time you select the TEMP -WP function, the new position that
you input will over-write the previous TEMP-WP position. After you
turn the system off, the TEMP-WP location is not retained in the
AP300DLX.
MENU
MOB
Robertson
AUTO
SPEED
DODGE
TUR N
STBY
OFF
S020
Press NAV button to
enter the NAV mode
MENU
MOB
Robertson
AUTO
SP EED
DODGE
TURN
STBY
OFF
OK:? Press NAV
Chg.
Brg.
WP: Temp-WP
220
160
Press ENTER
after
selecting
the Latitude and Longitude for
the temporary waypoint
Press RESET to zero the
Cross Track Error value
Press STOP
to stop
navigating
toward WP
MAIN
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
ROUTE
ENTER
ESC
TEMP-WP
N 40°52.60'
E 72°30.15'
BRG : 000 °M
DST : 00.00 Nm
Temporary
waypoint
AP300DLX is now set to
steer automatically to the
Temp-WP.
When you arrive, the END of ROUTE
message will appear.
Bearing to Temp -WP and
heading change required to
turn boat to steer
to Temp-WP shown here.
Press NAV button again to
accept the course change
to steer the boat automatically to
the Temp-WP.
TEMP -WP
will appear
as the
current
waypoint
to navigate
toward.
Adjust the
Latitude value
Adjust the
Longitude value
NAV
SET U P
NAV
SETUP
MENU
MOB
Robertson
AUT O
SP EED
DODGE
TURN
NAV
SETUP
STBY
OFF
N
.02 Nm
Turn to adjust TEMP-WP
position values
Robertson
WEST EAST
NORTH
00
PLOT INSTR MOB INFO NAV
PORT STBD
Use to move cursor to
next line
Use the or to move
cursor to character field.
STOP
MAIN
RESET
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
COG: 020° SOG: 10.00Kt
ROUTE WAYPT
NAV source: AP300DLX
WP: TEMP-WP
BRG: 220° DST: 3.8 Nm
STOP MAIN
RESET
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
COG: 020° SOG: 10.00Kt
ROUTE WAYPT
NAV source: AP300DLX
WP: TEMP-WP
BRG: 220° DST: 3.8 Nm
STOP MAIN
RESET
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
COG: 020° SOG: 10.00Kt
ROUTE
WAYPT
NAV source: AP300DLX
WP: TEMP-WP
BRG: 220° DST: 3.8 Nm
GOTOMAIN
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
COG: 075°M SOG: 5.00Kt
ROUTE WAYPT
SETUP
Destination:
TEMP MAIN
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
ROUTE
WAYPTESC
COG: 075°M SOG: 5.00Kt