Operation Manual

Robertson AP300X Autopilot
56 22081814H
Navigating to a stored waypoint
MENU
MOB
Robertson
AUTO
SPEE D
DODGE
TURN
STBY
OF F
S020
Press NAV button to
enter the NAV mode
MENU
MOB
Robertson
AUTO
SPEED
DODGE
TURN
STBY
OFF
OK:? Press NAV
Chg.
Brg.
WP: Buoy 32a
220
160
Press ENTER
after
the pointer
is set to the correct waypoint.
Press RESET to zero the Cross Track Error value
Press STOP
to stop
navigating
toward WP
NAV
SETUP
NAV
SETUP
AP300DL is now set to actively
steer automatically to the waypoint.
When you arrive, the END of ROUTE
message will appear.
Bearing to waypoint and
heading change required
to turn boat to steer to
waypoint.
Press NAV button again to
accept the course change
to steer the boat automatically to
the waypoint.
WAYPOINT
will appear
as the
current
waypoint
to navigate
toward.
N 40°52.60'
W 72°30.15'
BRG: °M
DST: Nm
Buoy 32a
Select Wp -- >
ESC MAIN
ENTER
MOB - WP
TEMP - WP
Canal1
Buoy26
LP Bay
Nassau22
Jessup17
Buoy32a
XXXX - 008
Selected
Waypoint
MENU
MOB
Robertson
AUTO
SPEED
DODGE
TURN
NAV
SETUP
STBY
OFF
N
.02 Nm
Turn to position
pointer at waypoint you
wish to steer toward.
Robe rts on
PORT
STBD
WEST EAST
NORTH
00
PLOT INSTR
MOB
INFO
NAV
GOTOMAIN
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
COG: 075°M SOG: 5.00Kt
ROUTE WAYPTSETUP
Destination:
TEMP MAIN
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
ROUTE
WAYPT
ESC
COG: 075°M SOG: 5.00Kt
STOP MAIN
RESET
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
COG: 020° SOG: 10.00Kt
ROUTE
WAYPT
NAV source: AP300DLX
WP: Buoy32a
BRG: 220° DST: 3.8 Nm
STOP
MAIN RESET
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
COG: 020° SOG: 10.00Kt
ROUTE WAYPT
NAV source: AP300DLX
WP: Buoy32a
BRG: 220° DST: 3.8 Nm
STOP
MAIN
RESET
GPS 1 POSITION
N 40°52.60'
W 72°30.15'
COG: 020° SOG: 10.00Kt
ROUTE WAYPT
NAV source: AP300DLX
WP: Buoy32a
BRG: 220° DST: 3.8 Nm