Operation Manual

Robertson AP300X Autopilot
58 22081814H
Plotting with the AP300DLX
Zoom OUT
(higher scale)
Own
ship
Waypoint
Previous
ship's track
Plot Screen with NO
waypoint currently
selected in AP300DLX
Plot Screen with
waypoint (Temp-WP)
selected in AP300DLX
Plot mode presents a temporary track plot of the
ship's movement. Each time you access the PLOT
mode, the screen is re-drawn with the boat's
current position in the center of the screen.
If a waypoint is active in the AP300DLX, the ship's
position and the waypoint position will
automatically be shown in the lowest scale
possible to display both ship and WP positions.
As your position changes, the correct scale is
automatically set to display both the ship's position
and the waypoint position each time the SCALE
key is pressed.
Ship's position
Autoscale:
AP300DLX automatically
selects the lowest scale
to display ship's position
and WP position on screen.
Zoom IN
(lower scale)
Ship's position
Own
ship
Previous
ship's track
ESC
> <
MAIN
< >
SCALE
PLOT GPS 1
Position
N 40°52.60
W 72°30.15
Scale
32 Nm
ESC
> <
MAIN
< >
SCALE
PLOT GPS 1 #
Position
N 40°52.60
W 72°30.15
Waypoint
TEMP-WP
XTE : 0.05
BRG : 59° M
DST : 9.8 Nm
Scale
32 Nm
Position marks
(selectable)
Scale range: 0.5 Nm - 32 Nm
WEST
EAST
NORTH
00
PLOT
INSTR
MOB INFO NAV
PORT STBD
Note ! Each time the PLOT screen is re-drawn by changing scale, up to the last 10
position marks will be automatically re-entered on the plot. The number of
re-entered position marks is dependent of the selected scale and the selected
time interval between each position mark.