Operation Manual
Table Of Contents
- AP300X INSTRUCTION MANUAL
- FRONT MATTER
- GENERAL INFORMATION
- Introduction
- How to use this manual
- System components
- Optional components
- NI300X NMEA Interface Unit
- CI300X Compass Interface
- Rudder" indicator
- Compass" Indicator
- CDI35 Course Detector Interface
- LF3000 Linear Feedback
- LFI3000 Linear Feedback Interface
- Robnet cables
- R3000X Remote Control
- S100 NFU steering lever
- S3 NFU steering lever
- JP300 Jack Point
- Mounting brackets
- Top mount bezel
- Flush mount bezel
- AP300X AUTOPILOT OPERATION
- Overview
- AP300X with MSD50 Stern Drive unit
- ON/OFF / Standby mode
- Automatic Steering
- Navigating with the AP300X
- Wind vane steering
- Automatic Speed selection
- Multiple station system
- Lock function
- The User Set-up Menu
- AP300DLX Main features
- Operation of Graphic Display
- Waypoints
- Routes
- Navigating with the AP300DLX
- Glossary
- INSTALLATION
- General
- RF300 Rudder feedback installation
- Junction unit installation
- Drive unit installation
- Control unit installation
- RFC35 Fluxgate Compass installation
- JP300 Jack Point installation
- R3000X Remote Control installation
- S3 NFU Lever installation
- S100 NFU Lever installation
- Interfacing
- Software Setup Procedure
- Sea Trial
- MAINTENANCE
- TROUBLE SHOOTING
- TECHNICAL SPECIFICATIONS
- AP300X AUTOPILOT SPARE PARTS LIST
Robertson AP300X Autopilot
90 22081814H
Note ! A previous version of the LF3000 has been delivered with an alternative
cable with a different color code. The alternative cable is connected according
to the drawing below:
TB2
Orange
Black
Blue
Black
CI300X Analogue Interface Unit
The CI300X analog interface unit is an optional module, designed to
enable a variety of different equipment to connect into AP300X
systems. The CI300X converts the analog inputs into Robnet
compatible signals for use by AP300X system components. The
CI300X adds the following capabilities to the AP300X system, and
allows connection of each of the following simultaneously:
Magnetic compass connection (Robertson APC100 or APC135 with
CD100 course detector).
Gyrocompass connection for Robertson RGC50, RGC10
Analog input of SIN/COS for either one of the following:
• Fluxgate compass connection (for other manufacturers SIN/COS
fluxgate compasses)
• Analog windvane (SIN/COS)
Steering lever connection for either one of the following:
• S9 Remote steering lever connection
• S3 local steering lever connection
For detailed information, see separate CI300X Manual