Operation Manual

Simrad - RS12 Operation and Installation Instructions 15
1. Select BUDDY LIST. Press ENT to display the list of entries.
2. Scroll down (if required) to the entry and press ENT.
3. Select EDIT. The cursor is at the first character of the name.
4. Edit the buddy name or, to edit only the MMSI, press ENT repeatedly until the cursor
moves to the MMSI line.
5. When you are finished, press ENT (repeatedly if necessary) to display the next screen.
6. Press ENT to store the changes. The buddy list is displayed again. If more changes are
required, repeat Steps 2 through 6. Otherwise, press ESC to cancel.
2-2 Maintain Your Buddy List (BUDDY LIST)
Use the Buddy List to store the names and associated MMSI’s of 20
favourite people. Names are stored in the order of entry, with the
most recent entry shown first.
The following sections show how to add, edit, and delete entries
on your BUDDY LIST. Section 5 explains how to call a buddy.
2-2-1 Add an Entry
1. Select BUDDY LIST. The cursor is at MANUAL NEW. Press ENT.
2. Enter the buddy name, one character at a time (this may be alphanumeric) then press
ENT repeatedly until the cursor moves to the MMSI entry line.
3. Enter the MMSI associated with that buddy name (this must be numeric) then press
ENT. If the MMSI is for a Coast Station, enter the 7 digits then press ENT twice.
4. The new buddy name and MMSI are displayed. Press ENT to store the new entry, which
is displayed at the top of your buddy list.
Note: When the BUDDY LIST is full (20 entries), you can make a new entry and the buddy at
the end of the list is automatically erased.
2-2-2 Edit an Entry
MENU SELECT
►BUDDY LIST
LOCAL/DIST
BACKLIGHT ▼
BUDDY LIST
►MANUAL NEW
ALEX
TOM
ENTER NAME
––––––––––––
ENTER MMSI
–––––––––
ENTER NAME
BOB
ENTER MMSI
123456789
BOB
123456789
►STORE
CANCEL
ALEX
►EDIT
DELETE
EDIT NAME
ALEX
EDIT MMSI
112233445
ALEX
111223344
►STORE
CANCEL
BUDDY LIST
►MANUAL NEW
ALEX
TOM