Operation Manual

Simrad - RS12 Operation and Installation Instructions 35
1. Press CALL to enter DSC mode. then select LAST CALL. Press ENT to display the contact
details of the most recent incoming call.
2. Press ENT to recall the caller. Select the working channel and press ENT. See details
about the working channel in section 5-2-1, paragraph 3 above.
3. The radio summarizes the call details and asks for confirmation to send the call (SEND?).
Press ENT to send the call, and continue as explained in Section 5-2-1.
5-2-5 Call a Group (GROUP)
RD GROUP
055554444
ROUTINE
INTER-SHIP
GROUP
RD GROUP
GROUP #2
GROUP#3
DSC CALL
INDIVIDUAL
LAST CALL
GROUP
RD GROUP
055554444
ROUTINE
SEND?
1. Press CALL to enter DSC mode, then select GROUP. The radio displays the names of your
groups you setup in section 4-3.
2. Select the group that you want to call (the Group MMSI must already be setup).
3. Select the working channel and press ENT. See details about the working channel in
section 5-2-1, paragraph 3 above.
4. The radio summarizes the call details and asks for confirmation to send the call (SEND?).
Press ENT to send the call, and continue as explained in Section 5-2-1.
5-2-6 Call All Ships (ALL SHIPS)
ALL SHIPS
URGENCY
INTER-SHIP
ALL SHIPS
SAFETY
URGENCY
DSC CALL
LAST CALL
GROUP
ALL SHIPS
ALL SHIPS
URGENCY
SEND?
1. Press CALL to enter DSC mode, then select ALL SHIPS.
2. Select one of the following call priorities:
SAFETY to send safety information to all other vessels in range
URGENCY for use when a serious situation or problem arises that could lead to a
distress situation
3. Set the working channel. See details about the working channel in section 5-2-1,
paragraph 3 above.
4. The radio then asks for confirmation of the ALL SHIPS call. Press ENT to send the call.
Continue as explained in Section 5-2-1.
5-2-7 Call using the Call Log (CALL LOG)
The Call Log contains the contact details for the 20 most recent incoming calls, so that you
call any of them again quickly.