User's Manual Part 1

To cancel lift the handset, alternatively press ON/C or 16. The

display will show the last channel scanned.

3.10.1 Dynamic All scan inhibit

If the radio repeatedly locks onto the same busy channel, this

can be excluded from the scan by pressing S

HIFT then 1W

CAN ALL) while locked on that channel.

“INHIBITED” will be displayed for 2 seconds, after which the

scan will resume whilst excluding the inhibited channel. To

reset inhibited channels, please refer to sections 4.1.1 and 4.1.2.

3.11 Memory scan mode

Memory scan allows scanning of a pre-programmed set of

channels speciﬁed by the user (see also sections 4.1.4 and 4.1.5).

To enter Memory scan mode, press S

HIFT followed by D/W

CAN M). Two LCD segments will now circle the screen to

indicate that scanning is in progress (Fig 3.7). If the radio locks

onto a channel, press O

K to continue the scan, or wait until the

signal becomes clear.

Instruction manual

E04572

INT

SCAN

ALL

Fig 3.6 - All scan mode

INT

SCAN

ALL

INT

SCAN

Fig 3.7 - Memory scan mode

SHIFT

INT

SCAN

SHIFT