User's Manual Part 1

Press ON/C to return to the Scanning menu.

4.1.2 All scan reset

In the Scanning menu press the OK key to enter the submenu,

then use the

▲ and ▼ keys to select “ALL RESET”. Now press

K to reset all inhibited channels. The display will show

“RESETTING” for 2 seconds, then “ALL RESET” (Fig 4.2).

RS81/RS82 VHF

E04572

Press ON/C to return to the main mode, or use the ▲ and ▼

keys to select another option.

4.1.3 All scan show

This Scanning mode function will display all inhibited chan-

nels. In Scanning mode press O

K and use the ▲ and ▼ keys to

select “ALL SHOW”. Press O

K again and the display will

change, “SHOWING” all inhibited channels in sequence.

Press O

N/C to return to the main menu, or use the ▲ and ▼

keys to select another option.

NOTE If private or auxiliary channels have been omitted from scan-

ning, the “SHOWING” function will display them after the

normal channels that have been excluded from scanning.

4.1.4 Memory scan select

This function selects the channels to be used in the Memory

scan cycle (see section 3.10).

In Scanning mode press O

to enter the submenu and use the

▲ and ▼ keys to select “MEM SEL”, which will be displayed

(the display will show “INHIBITED”), the channel to be re-

enabled (Fig 4.1). Press O

K to conﬁrm each setting.

ALLAI NH

INT

Fig 4.1 - Selected channel inhibited from scan

ALL RESETE

Fig 4.2 - All inhibited channels reset