User's Manual Part 1

Instruction manual

E04572

To enter the nine-digit MMSI number, use the ▲ and ▼ keys to

scroll and select the number required. Use the V

OL and SQ

keys to correct any errors and press OK when entry is complet-

ed. The radio will now display “CONFIRM” and the MMSI

number must be re-entered. If the two numbers do not match,

the above procedure must be repeated.

NOTE The MMSI number will not be accepted, unless all nine digits

have been entered; the sufﬁx “0” is automatically inserted by

the radio.

CAUTION The MMSI number can only be entered once and cannot be edit-

ed by the user. Should it become necessary to change the MMSI

number (e.g. if the radio is being moved to another boat), the

radio must be sent to an authorised Simrad service agent for

reprogramming.

Press O

N/C to return to the Numbers menu.

4.2.2 ATIS number

NOTE This section applies only to radios used in countries where the

ATIS system is in operation (Benelux and the Rhine/Danube

waterways). This option will only appear on ATIS-equipped

radios (see also section 1.5).

From the Numbers menu select “ATIS NO” – the display will

show the ATIS number, unless the number has not been

entered yet, in which case the display will show dashes only,

with a ﬂashing dash indicating the cursor position (“- - -”).

Enter the nine-digit ATIS number using the

▲ and ▼ keys and

the V

OL and SQ keys to correct any errors.

Press O

K when entry is completed and re-enter the number

when prompted by the radio (“CONFIRM”, Fig 4.6, p. 30). If the

two numbers do not match, the procedure must be repeated.

1234 - - - - -

INT

Fig 4.5 - Entering the MMSI number