User's Manual Part 1

RS81/RS82 VHF
32
E04572
4.3.2 Last used channel
Normally, the RS81 will power up on the pre-programmed
start-up channel (usually the priority channel). The Last used
channel function enables the radio to power up on the last used
channel (the default setting is ”OFF”).
Press O
K to enter the VHF Items submenu and use the ▲ and ▼
keys to select “LST CH", which will show either “Y[es]”, or
“N[o]”. Use the O
K key to toggle between “Y” and “N”.
Press O
N/C to exit the submenu, or use the ▲ and ▼ keys to
select another option.
4.3.3 Interrupt intercom
This function is used to specify whether intercom functions
should be interrupted when an incoming VHF transmission is
received.
Press O
K to enter the VHF Items submenu and use the ▲ and ▼
keys to select “INT ICM Y” – note that the default setting is
“Y[es]”. Use the O
K key to toggle between “Y” and “N”.
Press O
N/C to exit the submenu, or use the ▲ and ▼ keys to
select another option.
4.3.4 Speaker settings
The speaker settings option is used to set the individual default
volume levels for each station and/or intercom in the system.
Press O
K to enter the VHF Items submenu and use the ▲ and ▼
keys to select “SET SPKRS”, then press OK again to enter the
speaker settings menu, the display will show “DEFAULTS”
(Fig 4.8). Use the
▲ and ▼ keys to choose “STATION 1” or
“STATION 2”, then press O
K to confirm.
16
DEFAULTS 00
INT
Fig 4.8 - Resetting speaker settings to defaults
NOTE This menu has a wrap-around function.
Press O
N/C to exit, or use the ▲ and ▼ keys to select another
option.
16
SET SPKRS 00
INT