User's Manual Part 1

Instruction manual

E04572

Should the radio lock onto a busy channel, pressing OK will

manually continue the scan. All scan will otherwise automati-

cally restart when the channel becomes clear.

NOTE All other stations will also show the All scan display.

NOTE While in All scan mode, normal VHF functions are not avail-

able. To exit All scan, press 16 or O

N/C, or lift the handset from

the cradle.

7.8.1 Dynamic All scan inhibit

During All scan, if the radio repeatedly locks onto a busy chan-

nel, this channel can be excluded from scanning by pressing

HIFT then 1 (SCAN ALL) while locked onto it. The display will

show “CHANNEL INHIBITED” and the channel will no

longer be included in the scan cycle.

The channel can be reinstated using Memory scan select

(please refer to section 8.1.4).

7.8 All scan mode

The scan function cycles the RS82 sequentially through each

enabled channel, pausing each time a signal is detected.

Press S

HIFT followed by 1 (SCAN ALL) to enter All scan mode. If

All scan is selected while the handset is off the cradle, the dis-

play will show “PLACE BACK ON CRADLE”. All scan will be

cancelled if the handset is not returned to the cradle within 10

seconds.

When the radio detects a signal, the display will change to

show the relevant channel number (Fig 7.7).

INT

SCAN

ALL

Fig 7.7 - All scan mode