User's Manual Part 1

RS81/RS82 VHF

E04572

7.9 Memory scan mode

Memory scan allows scanning a pre-programmed set of chan-

nels speciﬁed by the user (see also sections 8.1.4 and 8.1.5).

To enter Memory scan mode press S

HIFT then 2 (SCAN M). If

Memory scan is selected while the handset is off the cradle, the

display will SHOW “PLACE BACK ON CRADLE”. Memory

scan will automatically commence, if the handset is replaced

within 10 seconds.

The display will show “SCAN M”. When the radio detects a

signal, it will lock onto this and the large digits will change to

show the relevant channel (Fig 7.8).

Should the radio lock onto a busy channel, pressing O

K will

manually continue the scan. Memory scan will otherwise auto-

matically restart when the channel becomes clear.

NOTE If only one channel has been stored initiating Memory scan

will retune the RS82 to this channel.

NOTE All other stations will also show the Memory scan display.

NOTE While in Memory scan mode, normal VHF functions are not

available.

To exit Memory scan, press 16, or O

N/C, or lift the handset

from the cradle.

7.9.1 Dynamic Memory scan delete

If the radio repeatedly locks onto a busy channel when scan-

ning, this channel can be removed from the Memory scan by

pressing S

HIFT then 2 (SCAN M) while locked on that channel.

The display will show “CHANNEL DELETED” and the chan-

nel will no longer be included in the scan cycle.

INT

SCAN

Fig 7.8 - Memory scan mode