User's Manual Part 2

Instruction manual
83
E04572
Press M
SG
to move the cursor forward, or C
ALL
to move
back and correct any errors (the cursor position is indicated by
the flashing character, enter a new character to overwrite).
Press O
K to confirm the entry and move on to the MMSI entry.
Use the numeric keypad to enter the number (Fig 10.3). Press
the C
ALL and MSG keys to correct any errors. The cursor
position is indicated by the flashing number; enter a new num-
ber to overwrite an incorrect number. Press O
K to confirm and
store the entry in the directory.
10.3 Entering a number
Press OK to begin entering a new number – the large digits will
show the entry number in the directory (“1” for the first entry).
Enter the name first; use the V
OL ▲ and VOL ▼ keys to scroll
through the alphabetical characters and the numeric keypad to
enter any numbers (Fig 10.2).
Press ON/C at any time to abort to the default display.
NOTE When using the Boat or Coast Station directories the entry will
not be accepted, unless all nine digits of the MMSI have been
entered.
1 0 1
SEASP-----
----------
DIR
INT
Fig 10.2 - Entering a new name into the directory
1 0 1
SEASPRAY 0
47539-----
DIR
INT
Fig 10.3 - Entering the MMSI number