User's Manual Part 2

Instruction manual
55
E04572
8.1.6 Memory scan show
This function displays all channels selected for Memory scan.
From the Scanning menu select “MEMORY SCAN SHOW” and
press O
K. The display will change to “SHOWING CHANNELS”
and display all enabled channels in sequence.
Press the V
OL ▼ or VOL ▲ key to select another Scanning menu
option, or O
N/C to return to the main menu.
8.1.7 Scan dwell time
This function is used to select the amount of time the RS82
remains on a channel, after it has locked onto it during a scan-
ning function (All scan or Memory scan) and the signal is lost.
From the Scanning menu (section 8.1) select “SCAN DWELL
TIME XX” (where “XX” denotes the current dwell time in sec-
onds), then press O
K (Fig 8.5).
The default time is “0”, meaning that the scan will continue as
soon as the signal is lost. There are 11 levels from 0–10 seconds.
Use the numeric keys to enter the scan dwell time and press O
K
to select – the display will show “DWELL TIME XX SECONDS”.
Press the V
OL ▲ or VOL ▼ key to select another Scanning menu
option, or O
N/C to return to the main menu.
8.2 Numbers
The Numbers menu is used for entering ID numbers such as
MMSI, Group MMSI and ATIS (if applicable in country of use).
Once the Numbers menu option has been selected (see intro-
duction to section 8), the V
OL ▲ and VOL ▼ keys to scroll
through the menu options below:
• Ship’s MMSI (section 8.2.1)
• Group MMSI (section 8.2.2)
• ATIS number (section 8.2.3)
NOTE The ATIS number option will only be shown if the radio is
ATIS enabled. This feature is only available for sets used in the
Benelux and Rhine/Danube waterways.
To return to the main menu, press O
N/C.
Fig 8.5 - Scan dwell time
SCAN DWELL
T I ME 04