Operation Manual

SCAN ALL

- -

INT SB

Scan All mode monitors all channels for transmissions. *

Squelch must be set above level 1 before this mode can be selected. The Scan

function will go in Stand-by mode if the handset is out of its cradle.

* In Europe Channel 16 is always monitored.

Activate/terminate Scan All.

While scanning is in progress, channel numbers

will not be displayed.

When a transmission is detected, the set will lock

on for four seconds and display the number of the

channel.

When a handset is lifted, the scanning stops and

goes in stand-by mode. The display will show the

last received channel.