Operation Manual

25
A A
A A
SHIPMATE
Installation of transceiver unit, hand-
set cradle and watertight socket.
(Optional).
The transceiver unit is not waterproof,
so it will have to be installed in a dry
place.
1. Fasten the transceiver unit with the
4 screws (included) in the holes
marked A.
2. Fasten the handset cradle with mini-
mum 4 screws (included).
Take care that the cradle is not mount-
ed upside-down, as the plastic spring
has a cutout for the cable.
3. Drill a Ø22mm hole for the water-
tight socket.
4. Place the socket in the hole and drill
four Ø2mm holes for the included 4
screws.
INSTALLATION