Technical data

Instruction Manual
23
E04819 Issue 1.0
Press OK to change the channel’s Memory Scan status – i.e. if
it is not selected, pressing OK will add it to the Memory Scan
cycle, and vice versa.
Additional channels can be added/removed by entering the
channel number and repeating the above procedure.
Press the V
OL ▲ or VOL ▼ key to select another Scanning menu
option, or press O
N/C to return to the main menu.
Note North American users – Only one Weather channel can be en-
tered into the Memory Scan; if another one is selected, it will
override the existing channel. The Weather channel is not scan-
ned as part of the Memory Scan sequence, it is used by the
Weather Watch function (see section 6.1).
3.1.5 Memory Scan clear
Memory Scan clear will reset all channels previously selected
for Memory Scan, so that a new set can be selected.
Press the V
OL ▲ or VOL ▼ key to select another Scanning menu
option, or press O
N/C to return to the main menu.
3.1.4 Memory Scan select
This function selects the channels to be used in the Memory Scan
cycle (see section 2.9).
From the Scanning menu (section 3.1) select “MEMORY SCAN
SELECT” and press O
K. Enter the relevant channel number
using the numeric keypad. The display will show the channel
number and its memory status – “MEM SCAN” if it is not cur-
rently selected for Memory Scan, or “MEM SCAN ENABLED”
if it is already selected (Fig 3.3).
65
MEM SCANAA
ENABLEDBB
INT
65
MEM SCANAA
INT
Fig 3.3 - Selecting a channel for Memory Scan
CHANNEL CURRENTLY NOT SELECTED CHANNEL ALREADY SELECTED