User's Manual

2.10 Adjusting backlighting

The display and keypad are backlit - to set the backlighting

level press Shift followed by Call (Dimmer) to enter back-

light mode.

Use the and (VOL) keys to adjust the backlighting level

from off through to level 5..

Press Ok or ON/C to exit the backlight mode at the selected

level.

NOTE Backlighting levels will only affect this station.

2.11 Handset off cradle

When a handset is lifted off cradle, all other stations will show

“Occupied” on the display (Fig 2.9). This means that these sta-

tions are locked out until the handset is returned to the cradle,

unless the station is being called on intercom by the handset.

Instruction Manual

Part No. E04297

NOTE The handset plugged into the lowest numbered port is

designated the Master unit. Lifting the Master handset will

override all other stations, even if it is displaying “Occupied” -

all other stations will then display “Occupied” and be locked

out.

STAT I ONAA2

OCCUP I EDBB

INT

Fig 2.9 - Station 2 handset is in use