User's Manual

3.1.1 All Scan inhibit
If the radio is constantly locking onto a busy channel when
scanning, this channel can be inhibited from the scan cycle.
From the Scanning menu (see section 3.1) select All Scan Inhibit
and press Ok.
Enter the relevant channel number using the numeric keypad.
The display will show the channel number and it’s inhibit status
- “All Scan” for enabled, or “All Scan Inhibited” for inhibited
(Fig 3.1) -
Instruction Manual
21
Part No. E04297
Press Ok to change the channel’s inhibit status - i.e if it is
enabled, pressing Ok will inhibit it and vice versa. If the chan-
nel is inhibited, it will no longer be included in the All Scan
cycle. Enabling the channel will re-include it.
Additional channels can be inhibited/enabled by entering the
channel number and repeating the above procedure.
To exit, press the VOL or VOL key to select another
Scanning menu option, or press On/C to return to the main
menu.
3.1.2 All Scan reset
This function will reset all inhibited channels so that they are
enabled.
From the scanning menu (section 3.1) select All Scan Reset and
press Ok - the display will show “Channels Reset” (Fig 3.2) -
65
ALL SCANAA
INH IB ITEDB
INT
Fig 3.1 - Selected channel inhibited from scan
CHANNELSSS
RESETEDBBB
Fig 3.2 - All inhibited channels reset
Press the VOL or VOL key to select another Scanning
menu option, or On/C to return to the main menu.