User's Manual

3.1.5 Memory Scan clear
Memory Scan Clear will reset all channels selected for Memory
Scan so that they are disabled.
From the scanning menu (section 3.1) select Memory Scan
Clear and press Ok - the display will show “Channels Cleared”
(Fig 3.4) -
Instruction Manual
23
Part No. E04297
CHANNELSSS
CLEAREDBBB
Fig 3.4 - Selecting channel for Memory Scan
Press the VOL or VOL key to select another Scanning
menu option, or On/C to return to the main menu.
3.1.6 Memory Scan show
This function displays all channels selected for Memory Scan.
From the scanning menu (section 3.1) select Memory Scan
Show and press Ok. The display will then show “Showing
Channels” and display all the Memory Scan selected channels
in sequence.
Press the VOL or VOL key to select another Scanning
menu option, or On/C to return to the main menu.
3.1.7 Scan dwell time
This function is used to select the amount of time the RS87
remains on a channel after it has locked onto it during a scan-
ning function (All Scan, Memory Scan) and the signal is lost.
From the scanning menu (section 3.1) select Scan Dwell Time
and press Ok - the display will show “Scan Dwell Time xx”,
where xx is the current dwell time in seconds (Fig 3.5) -
Fig 3.5 - Scan dwell time
SCAN DWELL
T I ME 04
The default time is 0, meaning that the scan will continue as
soon as the signal is lost. There are 11 levels from 0-10 seconds
- use the numeric keys to enter the scan dwell time and press
Ok to select - the display will show “Dwell Time xx Seconds”.
Press the VOL or VOL key to select another Scanning
menu option, or On/C to return to the main menu.