User's Manual

To enter the MMSI number press Ok again. The display will

show ENTER MMSI and the ﬁrst dash in the number will start

ﬂashing to indicate that entry can begin.

Enter the nine digit MMSI number using the numeric keypad

and press Ok. The radio will then ask that the MMSI is re-

entered to conﬁrm. If the two numbers do not match, the

MMSI will need to be re-entered and re-conﬁrmed.

Use the Call and MSG keys to move the cursor to correct

any errors. The cursor position is indicated by the number ﬂash-

ing. Enter a new number to overwrite the incorrect number.

NOTE The MMSI number will not be accepted unless all 9 characters

have been entered.

Press the VOL or VOL key to select another Numbers

menu option, or On/C to return to the main menu.

3.2.2 ATIS number

NOTE This section applies only to radios used in countries where the

ATIS system is in operation (Benelux and the Rhine/Danube

waterways). This option will only appear on ATIS equipped

radios.

From the Numbers menu (section 3.2) select ATIS No. - the

display will show “ATIS No.” and the ATIS number (unless

the number has not been entered yet, in which case it will

show “_ _ _ _ _ _ _ _ _”).

CAUTION The ATIS number can only be entered once and cannot be

edited by the user. If it is necessary to change the ATIS num-

ber, the radio must be sent to an authorised Simrad service

agent for reprogramming.

To enter the ATIS number press Ok again. The display will

show ENTER ATIS and the ﬁrst dash in the number will start

ﬂashing to indicate that entry can begin.

Enter the nine digit ATIS number using the numeric keypad

and press Ok. The radio will then ask that the number is re-

entered to conﬁrm. If the two numbers do not match, the num-

ber will need to be re-entered and re-conﬁrmed.

Use the Call and MSG keys to move the cursor to correct

any errors. The cursor position is indicated by the number ﬂash-

ing. Enter a new number to overwrite the incorrect number.

NOTE The ATIS number will not be accepted unless all 9 digits have

been entered - the preﬁx 9 is automatically inserted by the radio.

Instruction Manual

Part No. E04297