User's Manual

3.3.6 Speaker settings
The Speaker Settings option is used to set the individual
default volume levels for each station, intercom and loudhailer
in the system.
From the VHF items menu (section 3.2) select Speaker Settings
and press Ok to enter the Speaker Settings sub-menu. Press
the VOL or VOL keys to scroll through each speaker, dis-
playing the default volume level for each one.
NOTE Only connected speakers will be shown.
The first option in the sub-menu is Reset To Defaults (Fig 3.10) -
pressing Ok when this option is displayed will reset all speaker
levels to their default settings - the display will show “Resetting
Levels”.
RS87 VHF
30
Part No. E04297
To set the required volume levels for each individual position,
use the VOL or VOL keys to select the required station
and press Ok. The selected speaker will then emit a continu-
ous tone indicating the current volume level. Press VOL or
VOL to adjust the volume level as suitable and press Ok to
confirm.
Press the VOL or VOL keys to select another station and
repeat the above procedure, or On/C to return to the VHF
Items menu. Press On/C again to return to the main menu.
16
RESET TO000
DEFAULTS00
INT
Fig 3.10 - Resetting speaker settings to defaults