User's Manual

The next stage is to specify the coast station the call is to be

routed through. Either manually enter the MMSI number of the

coast station using the numeric keypad, or press the VOL and

VOL keys to scroll through the Coast Station MMSI number

directory (Fig 4.4). Press Ok to conﬁrm the selected entry.

Instruction Manual

Part No. E04297

COAST 1 AAA

INT

NOTE The MMSI number entered must have two leading zeros

(indicating a coast station), or it will not be accepted.

The display will show “Press Ok To Send” - press Ok to initi-

ate the call, or On/C to abort.

On initiation of the call, the display will show “Attempting To

Connect”. If the call cannot be connected for any reason, the

display will show “Cannot Connect”, then “Pls Wait 15

Minutes” before returning to the default display.

If the call is connected, the display will show “Call In

Progress” (Fig 4.5) - press the PTT key to talk and release to

listen.

Fig 4.4 - Selecting a Coast Station from the coast station directory

NOTE The channel number displayed during the call is determined

by the Coast Station.

Press On/C to end the call, or wait for the other end to replace

the receiver.

CALL I N AAA

PROGRESSBB

INT

Fig 4.5 - Call has been connected