User's Manual

Press Ok again to automatically switch to the working
channel.
4.3.5 Group call
If the radio has a Group MMSI number entered (see section
3.2.3) and a Group call is received, the radio will sound an
incoming call alarm.
The display will flash between displaying “Routine Group
Call” + the caller’s MMSI and the specified working channel
(Fig 4.13). If the caller’s MMSI is stored in the MMSI directory
(see section 5.2), then the display will show the name stored
instead of the MMSI number.
RS87 VHF
40
Part No. E04297
06
ROUT I NESS
GROUP CALL
INT
FROMPRAY 0
3895623970
Fig 4.13 - Incoming Group call
Fig 4.14 - Working channel specified by incoming Group call
Press Ok to accept the call - the display will change to “Reply
On Ch X” (Fig 4.14), where X is the specified working channel,
or On/C to reject the call.
06
REPLY ONAA
CH 1 0BBBBB
INT