Operation Manual

Parameters

111

850-164385 / Rev.C

Message Bar

The Message Bar button is located in the System test menu.

This menu is accessed by pressing the Test... buttononthe

Setup menu.

The sonar automatically issues messages when a

disturbance occur. The messages are grouped into four

categories; Errors, System alarms, Operational

alarms and Warnings.TheMessage Bar parameter

dialogue is used to select at which level warnings and

alarms shall be presented.

The Message Bar is located at the bottom of the

display, and it contains four buttons, one for each

category of messages. These buttons give an overview

of the number of unread messages currently in the

system. Each of the four buttons gives access to a menu

where each message can be read, acknowledged and

deleted. When no messages are present, the four

buttons are grey.

When one or more unread messages

exists, the Warning and Operational Alarm buttons

are yellow, while the System Alarm and Error buttons

are red.

When no messag es are present, the four buttons are grey. When

one or more unread messages exists, the Warning and

Operational Alarm buttons are yellow, while the System

Alarm and Error buttons are red.