Operation Manual

Simrad SH80
46
850-164385 / Rev.C
Selecting a new parameter value
The menu system is operated by the trackball and the Select
button on the Sonar Operating Panel.
When you have gained more experience, and
have become more familiar with the available
options, you will select the parameters directly
from the “smart” buttons. Use the trackball to
move the cursor, and position it over the
button.
First method:
1. Use the trackball to move the cursor to
the right or left side of the button.
Observe that the cursor symbol changes.
2. Increase or decrease the option by
pressing the Select button (A).
Second method:
1. Use the trackball to move the cursor to the middle of the
button (B). Observe that the cursor symbol changes to a
small menu icon.
2. Click the Select button (A) on the Sonar Operating Panel.
Observe the parameter dialogue appearing at the bottom of
the menu (C).
3. Use the trackball to move the cursor, and press the Select
button on the Sonar Operating Panel to choose the new
setting (D).
4. Press Close (E) to close the parameter dialogue.
(C )D15012B
C
D
E
B
CURSOR
SONAR OPERATING PANEL
Menu Select View
Object
(
C
D150
1
1)
A