Operation Manual

Simrad SH80

850-164385 / Rev.C

Objects

The Objects menu is shown in all display modes, and displays the

range (R), bearing (B) and depth (D) to all selected objects.

The identification (ID) abbreviations for the different objects are:

AT - Automatic Target Track Marker

Ci - Circle Marker

M - Target Marker

OS - Own Ship Marker

PT - Position Track Marker

F-Radio buoy marker (if a GPS buoy system is connected)

The number behind the ID abbreviation refers to the same

number on the object in the sonar presentation. The P after the

Automatic Target Track Marker indicates the priority level

where the audio channel is locked to the target.

When selecting an object in the list, a list with all the available

object data will be shown below the Objects menu.

When selecting a Target Marker, Automatic Target Track

Marker or a Radio Buoy Marker in the list, a dotted bearing

line from the vessel to the marker will be presented.

To delete an object, select the relevant marker in the list, and

press the Delete button in the lower part of the menu. Pressing

the Delete All button will delete all objects.

The parameters for each marker are shown in the Inspect

Object parameter dialogue.