Operation Manual

Simrad SH80
70
850-164385 / Rev.C
View pop-up
The View pop-up menu is accessed using the View button over
the trackball on the Sonar Operating Panel or the middle mouse
button if an optional mouse is installed.
When activating the pop-up menu in the Catch Data view, it
will display the following reduced menu.
Parameters
Set New Display Centre - When this function is selected, the
new display centre is moved to the cursor’s position where the
View menu was activated.
Ship To Centre - When this function is selected, the own ship
symbol is moved to the centre of the view.
Zoom - The zoom function magnifies an area of the display by
positioning the cursor in its centre and pressing the Zoom
button. The zoom button works as a toggle switch for on/off of
the zoom function.
Erase Echoes - When this function is selected, all echoes
displayed on the sonar view will be deleted.
Synchronize - This function is not operational on the SH80
sonar. For synchronization to external equipment, refer to the
Setup menu.
Make Same Size - When this function is selected, window areas
tiled vertically will acquire the same width.