Operation Manual

Smartwatch Features
28
4. Tap the ‘Advanced setting’ option on the right end of the menu.
5. Tap the ‘Restore default’ option on the right end of the menu that
appears.
6. Tap ‘Yes’ to confirm that you want to restore the default settings.
Video Recorder
Video Recorder Options
The Smartwatch video recorder contains a wide range of settings you can
use to record videos. To access these settings, open the video recorder and
tap the (Options) icon in the bottom left corner of the view finder. The
following table explains each of the settings and the options available
under each one.
Settings
Options Available
Camcorder
settings
EV: Options of -2.0, -1.5. -1.0, -.05, 0, .05, 1.0, 1.5, 2.0
Night mode: On or Off
Anti-flicker: 50hz or 60hz
Video settings
Video quality: Low, Normal, Good
White balance
Auto, Daylight, Tungsten, Fluorescent, Cloudy, Incandescent
Effect settings
Normal, Grayscale, Sepia, Sepia green, Sepia blue, Color
invert
View Videos
Videos are not viewed through the Video recorder option on the
Smartwatch; they are viewed through the Video player option. Refer to the
Video Player section below for more details on how to watch the videos you
have taken.
Take Videos
To take videos with your Smartwatch, do the following:
To view photos you have taken, do the following:
1. Tap the Multimedia menu.
2. Tap the ‘Camera’ option in the top left corner of the screen.
3. Tap the (Options) icon in the bottom left corner of the screen.
4. Tap the ‘Switch to’ option in the menu.
5. Tap the ‘Video recorder’ option to activate the video recorder.
6. With the camcorder view finder displayed, point the lens at the item you
want to record and press the (Video) icon in the bottom centre of
the screen.
The camera will start to record video.