Specifications

sinaCAM Operation

Quick Start Guide Rev.: 1.2 (A) 13

9. Operation

9.1 Switching ON and OFF

After the base unit is connected to the power supply, the power LED glows red.

Switching ON

 Push the power switch.

– The power LED of the base unit changes from red to green.

– The HOME menu screen comes on.

– The system LED of the remote head lights up in orange, starts flashing

green and finally glows green continuously.

Note: The system LED of the remote head can indicate additional status in-

formation. For more indications refer to sinaCAM’s detailed user manual.

Switching OFF

 Push and hold the power switch for about 4 seconds.

– The power LED of the base unit changes from green to red.

– The display goes off.

– The system LED of the remote head goes off.

9.2 Using the Menus

 Use the arrow buttons and F1/F2 buttons to select menu items as

displayed.

 Use the scroll wheel to select and to confirm settings.

Figure 8:

Scroll Wheel

 Turn the scroll wheel to select.

 Push the scroll wheel to confirm.