Specifications

sinaCAM Regulatory Compliance
Quick Start Guide Rev.: 1.2 (A) 5
 Always put the protection cap onto the lens mount when transporting
the remote camera heads without lenses.
 Do not allow laser beams to enter the camera lens or the lens mount
opening, as this could cause damage to the CCD sensor.
3. Regulatory Compliance
The sinaCAM base station and the sinaCAM remote heads comply with the
following regulations:
 Low Voltage Directive (LVD), 2006/95/EC
 Electromagnetic compatibility (EMC):
– 2004/108/EC
– FCC 47 CFR Part 15 Subpart B Class B
 RoHS
4. Disposal
For European Union member states only:
The use of this symbol indicates that this product must not be disposed
of with household waste. By ensuring this product is disposed of
correctly, you will help prevent negative consequences for the environ-
ment and human health. At the end of its lifespan, take the product to an
appropriate recycling station. For more information about correct disposal
of electrical and electronic equipment please contact your local authorities
or your supplier where you purchased the product.
5. Introduction to sinaCAM
 sinaCAM is a small remote head HD studio camera system for professional
2D/3D broadcast and cinema production.
 Two signals of two sinaCAM remote heads are processed by the same im-
age processor. This enables:
– Pixel synchronous 3D output
– Identical image properties, like white balance, brightness and contrast
 C-mount threads and the option to adjust the back focus by changing the
flange back distance make it possible to use C-mount lenses for profession-
al production.
 A choice of professional accessories, such as different battery adaptors,
lens adaptors, lens accessories, handles, mounting plates and a carrying
case increases application possibilities.