User manual

sinaCAM Description
User Manual Rev.: E 13
6.2.2 The Rear Panel
Figure 4: Arrangement of the Terminals
Table 5: Terminals on the Rear Panel
Item
Designation
Description
A
Remote head
terminals (1, 2)
CoaXPress interface with 18 V power supply for the remote camera
heads, connection via 75 Ω coaxial cable with BNC plug
B
SYNC
(OUT, IN)
Terminals for, e.g.,
– an additional camera
– an external sync generator
C
HD-SDI output
(1A, 1B)
Terminals for, e.g., an HD-SDI monitor, a recording device or a
2D/3D converter; 1A/1B provides the image signal coming from
remote head terminal 1
D
HD-SDI output
(2A, 2B)
For the same equipment as listed next to item C; 2A/2B provides
the image signal coming from remote head terminal 2
E
LAN
100 MBit Ethernet service communication port
F
DVI output
Connection of a digital HD monitor
G
AUX
10-pin terminal, auxiliary signals for remote control unit,
iris control device, timecode or exposure trigger
H
Power input
12 – 24 V
Connection of a power supply adapter,
12 – 24 V DC, minimum 30 W