User manual

Installation sinaCAM
14 Rev.: E User Manual
7. Installation
7.1 Minimum System Requirements
Shooting with sinaCAM requires the below listed minimum equipment:
 A sinaCAM camera system, consisting of
– sinaCAM base unit
– one or two sinaCAM remote heads (depending on shooting in 2D or 3D)
 Further equipment, like
– C-mount lens suitable for 2/3” CCD cameras
– Remote head cable, 75 Ω coaxial cable with BNC plugs
– Video output cable for DVI and/or HD-SDI
– Digital HD monitor, able to display the desired output format and frame rate
– Digital recording device
– DC power supply for the sinaCAM base unit
7.2 Power Supply
It is recommended to only use official sinaCAM accessories as a power supply.
 For official sinaCAM accessories please refer to www.sinacam.eu
CAUTION
The use of a wrong power supply can cause fire or electric shock.
NOTICE
The use of a wrong power supply may cause damage to the camera system.
7.3 Remote Camera Head Connection
The base unit supplies 18 V power to the remote camera head terminals 1 and 2.
NOTICE
Connect only sinaCAM remote camera heads to terminals 1 and 2 of the base unit. Connection of any
other equipment to terminal 1 or 2 may not only cause damage to the camera system, but also to the
connected equipment.