User manual

sinaCAM Operation
User Manual Rev.: E 23
8. Operation
8.1 Switching ON and OFF
After the base unit is connected to the power supply, the power LED glows red.
Switching ON
 Push the power switch.
– The power LED of the base unit changes from red to green.
– The HOME menu screen comes on.
– The system LED of the remote head lights up in orange, starts flashing green and finally glows
green continuously.
Note: The system LED of the remote head can indicate additional status information. For more
indications refer to chapter 11 Remote Head System LED Indications.
Switching OFF
 Push and hold the power switch for about 4 seconds.
– The power LED of the base unit changes from green to red.
– The display goes off.
– The system LED of the remote head goes off.
8.2 Using the Menus
 Use the arrow buttons and F1/F2 buttons to select menu items as
displayed.
 Use the scroll wheel to select and to confirm settings.
Figure 15: The Scroll Wheel
 Turn the scroll wheel to select.
 Push the scroll wheel to confirm.