User manual

Operation sinaCAM
24 Rev.: E User Manual
8.3 Toggling between Standard/Alternative Memory
In order to save and reuse different menu settings, sinaCAM has two separate memories
(Standard/Alternative memory).
Figure 16: Standard/Alternative Setting
 Push the F1 button to toggle between Standard/Alternative memory.
The display shows the currently used memory:
F1 - SA. = Standard memory
F1 - AS. = Alternative memory
Important: If changed settings need to be saved for later reuse, always select the memory (Standard
or Alternative) before changing any settings.
8.4 Saving of New Settings
Figure 17: Saving of New Settings
 Push the F2 button to save new settings.
New settings will be stored in the preset memory (Standard or Alternative).
8.5 Frame Grabbing to USB Storage Device
To capture a snapshot of the current image, simply connect a USB storage device to the USB interface on
the front panel. This feature can be disabled by setting “Auto Grab” in the service menu to OFF.
The sinaCAM will then start capturing a frame and store it in 8-bit JPEG format. During this process the
color of the background light turns to green. Please keep the storage device connected during this "green"
phase and while a possible LED at the storage device indicates an ongoing data transfer! As soon as the
"green" phase is over, the USB device can be disconnected. For each additional frame grab, disconnect
the USB device first and then reconnect it again.
You can also manually trigger a frame grab from the Service menu by pressing F2.
Note: Frame grabbing works only with images from remote camera head 1.