User manual

The Menus sinaCAM
28 Rev.: E User Manual
9.2.3 Gain (Exposure Control)
The gain value sets the camera’s transfer characteristics. Shooting at a lower ASA value results in darker
images than shooting at a higher value. On the other hand, low ASA values result in images with less
visible noise.
Available settings:
ASA 200; ASA 400; ASA 800
Note: ASA rating corresponds to ISO rating.
9.2.4 WBalance (White Balance)
sinaCAM provides three choices for white balance adjustment:
– Fixed color temperature settings
– One-push automatic white balance (AWB)
– Full manual control of white balance (MAN)
9.2.4.1 Fixed Color Temperature Settings
sinaCAM provides a selection of fixed white balance settings optimized for various indoor and outdoor
light conditions.
Available settings:
3200 K; 4300 K; 5600 K; 6500 K
9.2.4.2 One-Push Automatic White Balance (AWB)
This function calculates white balance parameters from the current image content at the push of a button.
For best results point the camera head at a white surface.
Note: Automatic white balance affects the same camera settings as manual white balance!
Figure 20: White Balance Adjustment Screen
For automatic white balance follow these steps:
 Select the menu item USER under WBalance.
 Focus the remote heads on any white object.
 Push the arrow button below AWB!
White balance adjustment is performed automatically within a few seconds.