User manual

The Menus sinaCAM
38 Rev.: E User Manual
9.4.5 IrisMode
This setting was added with the March 2013 update.
Available settings:
CloseBN; Motor; Shutter
The IrisMode setting affects the behavior of the IRIS control knob/lever and the CLOSE button of a
connected remote control panel.
Table 8: Iris Mode settings and their effect
IrisMode setting
IRIS control knob/lever
CLOSE button
CloseBN
Manual iris control (realized by
simulation via the shutter), must be
enabled via the CLOSE button
Enables manual iris control via the
IRIS control knob/lever
Motor
Manual iris control (mechanically),
lens control module required, support
depends on connected lens type
Closes the iris (mechanically) ,
lens control module required, support
depends on connected lens type
Shutter
Manual iris control (realized by iris
simulation via the shutter)
“Closes” the iris (realized by iris
simulation via the shutter)
9.4.6 RecFlag
This setting was added with the March 2013 update.
Available settings:
Disabled; Enabled
This setting allows manual control of the HD-SDI record flag. While the “Enabled” option is selected, the
current RecFlag setting is displayed at the top of the menu screen and the flag can be toggled manually.
Press the F2 button to change between STBY (standby) and REC (REC flag active) modes.