User manual

sinaCAM The Menus
User Manual Rev.: E 41
9.5.3 USB Menu
Figure 33: USB Menu
While in this menu, you can manually trigger a frame grab to a connected USB stick by pressing F2.
Menu items:
 Auto Grab
– By default, the sinaCAM initiates a frame grab every time a USB stick is connected (see chapter
8.5, Frame Grabbing to USB Storage Device). If necessary, this can be disabled by setting Auto
Grab to OFF.
 Update
– Only shown when a USB stick with an update package is connected to the sinaCAM’s USB port.
Select “Update” and push the scroll wheel to start the software/firmware update process.
Note: Supported file systems are FAT32, ext2 and UDF (no NTFS!). The update package must be in
the USB stick’s root directory. Make sure there is only one package on the USB stick, otherwise it is
not guaranteed that the most recent one will be installed.