Manualshelf

User manual

ManualsBrandssinaCam ManualsDigital CameraHDC1-D
41424344454647484950
The Web Interface sinaCAM
48 Rev.: E User Manual
After a while, a the following screen should appear – the system is booting. The Ethernet connection is
terminated at this point.
Figure 42:
Web Manager - Firmware Update Successful
Check the firmware version displayed in the local sinaCAM menu SYSTEM INFO.
Reset the sinaCAM to its original settings via the Factory Preset command in the sinaCAM’s local
SYSTEM menu.
If everything was successful, switch the power off and on again for a final test.