User manual

sinaCAM Remote Head System LED Indications
User Manual Rev.: E 49
11. Remote Head System LED Indications
Table 9: Remote Head System LED Indications
State
Indication
No power
Off
System booting
Solid orange
Link detection in progress, power supply for remote
camera head active
Fast flash green
Shown for a minimum of 1 s even if the link
detection is faster
Link detection in progress, resync
Fast flash orange
Shown for a minimum of 1 s even if the link
detection is faster
Power supply for remote camera head over-current
(Host only)
Solid red
Device / Host connected, but no data being trans-
ferred
Slow pulse green
Device / Host connected, data being transferred
Solid green whenever data transferred (i.e.
blinks synchronously with data)
Error during data transfer (e.g., CRC error, single
bit error detected)
500 ms red pulse
In case of multiple errors, there shall be at least
200 ms green before the next error is indicated
System error (e.g., internal error)
Fast flash red