User manual

Safety Instructions sinaCAM
8 Rev.: E User Manual
2. Safety Instructions
2.1 Warning Signs and Indications
CAUTION
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
Indicates a potentially hazardous situation which, if not avoided, may result in property damage.
2.2 General Safety
 Read and follow all safety and operating instructions before installing and operating the camera
system.
2.3 Specific Safety
 Only use the type of power source specified for this camera system. The use of a wrong power source
could damage the camera system and/or cause fire or electric shock!
 Do not open the housing of the camera system. Risk of electric shock!
 Do not open the housing or attempt to repair or modify any part of the camera system. Repairs must
only be carried out by authorized sinaCAM service centers.
 Do not store the camera system near a strong magnetic field, or in areas where it would be subjected
to direct sunlight, extreme temperatures, high levels of humidity or severe vibrations.
 Do not use the camera system outside the specified operating temperature range.
 Keep all liquids away from the camera system. Do not place containers with liquids on top of the
camera housing. Risk of fire, electric shock and/or damage!
 Do not use the camera system in places where it could come in contact with water, moisture, steam
or dust. This could damage the camera system and/or cause fire or electric shock!
 Unplug the power cable by the plug, do not pull the cable.
 Unplug all cables before transporting the camera system or storing it inside a camera case.
 Always put the protection cap onto the lens mount when transporting the remote camera heads
without lenses.
 Do not allow laser beams to enter the camera lens or the lens mount opening, as this could cause
damage to the CCD sensor.