DEHUMIDIFIER USER’S MANUAL CFO-12E CFO-20E E3CF0029-FM.
Structure and principle Operation Appendix Before using your dehumidifier, please read this user’s manual carefully, in order to ensure correct and safe use. After reading the manual, make sure it is stored in a safe place for future reference if necessary. Maintenance Contents E3CF0029-ML.
Structure and Principle Features Powerful dehumidifying capability Excellent drying laundry function Taking advantage of refrigeration principle, the dehumidifier powerfully removes partial moisture from air to drop the humidity of the room and keep indoor air dry and comfortable. The dehumidifier dries laundry quickly. This can prevent laundry and furniture from becoming damp and musty in a rainy season.
Structure and Principle Specifications Model CFO-12E CFO-20E 220 230V, 50Hz Power Supply Dehumidifying Capacity 12L/day 20L/day 220W 400W Power Consumption Drainage Tank Capacity 6.0L(automatic stop at about 5.5L) Weight 12.5kg Dimension(height width depth) 545mm 14kg 380mm 261.5mm The dehumidification capacity is the value obtained after the dehumidifier was continuously run in the room temperature of 30 with the relative humidity 80%.
Structure and Principle How dehumidifying works Cooling unit Re-heating unit It draws in room air, cools it with a cooling unit, and changes the humidity to drops of water. The drops of water fall into a drainage tank. Moist air Dried air The dehumidified air is re-heated by a heating unit and discharged. Steps , ,and are repeated to remove humid- ity from the room.
Structure and Principle Structure of dehumidifier Handle Louver Operation panel Discharge port Plastic film Float Water level gauge Drainage tank NOTE: Please take off the plastic film before using. -4- E3cf0029.
Structure and Principle Air filter (Air intake port, do not obstruct!) Continuous drainage port Power supply plug -5- E3cf0029.
Operation Operation steps: 1. Plug the power supply plug into the outlet. 2. Open the louver by hand. 3. Press the power suitch. 4. Select operation mode or let it run in the default mode. 5. Press the power switch once again to stop operation. - 68 - E3cf0029.
Operation Operation panel Indicator lamp 1.Tank full indicator lamp It will light when the drainage tank is full or positioned incorrectly. Empty the water out of the drainage tank, and make sure the tank is positioned properly. 2.Power indicator lamp It will light when the unit is plugged in. 3.mode indicator lamp ” lamp or When “ ” lamp or DIFY, LAUNDRY or QUIET mode. ” lamp is lighted, it respectively indicates that operation is in DEHUMI- 4.
Operation Switch function 5. “ ” switch Press the switch once to start operation, press it again to stop operation. 6. “ ” switch Each time the switch is pressed, the operation mode changes in the order of “DEHUMIDIFY”, “LAUNDRY” and “QUIET” and the corresponding mode indicator lamp will change with the operation mode. The default is “DEHUMIDIFY”. when the indoor temperature is above 35 , the protection device is actuated, the unit only can operate in LAUNDRY mode and pressing “ ” switch is ineffective.
Operation Draining the water If the drainage tank becomes full (approx. 5.5 liters), the “ ” lamp lights to alert the user, operation stops automatically. Empty the water from the drainage tank and discard it. Drainage steps Notation for drainage Do not remove the bubble packing from the float on the unit, in order to prevent water from leaking from the water tank onto household furniture. This can cause electrical shock and/or short-circuiting.
Operation Draining the water Continuous drainage of water The unit has a continuous drainage port. Using a commercial hose (with an inner diameter of 15mm), the water in the drainage tank can be continuously drained out of the continuous port of the unit. When setting up the equipment for continuous drainage, always stop operation first and unplug the power supply plug. 1. Disconnect the drainage tank and open the continuous drainage port.
Operation Make sure at lease some place is provided around it when the unit is operating. Note: Please stop working and discard the water before move the dehumidifier. Tilt it within range of 30 degrees. - 11 - E3cf0029.
Maintenance Caring for the dehumidifier Clean the air filter The air filter should be cleaned approximately once two week. First, Remove the air filter, then run a vacuum cleaner lightly over the surface of the air filter to remove dirt. If the air filter is very dirty, wash it with warm water and a neutral cleaning solvent and dry it thoroughly, attach the airfilter. Storing the dehumidifier When the unit is not to be used for a long period of time 1.
Maintenance Notation for safe operation When use the unit, please observe the following safety precautions: 1.When the unit works in LAUNDRY mode, keep it an appropriate distance away from the clothings, and prevent the water from dropping onto it. 2.Before clean the unit or when do not use it for along period of time, unplug the power supply cord. 3.Do not wash the unit with water also put the unit close to water,explosive or flammable things. 4.
Maintenance Removing breakdowns If a condition listed below occurs, please check the following items to help you to save your time and cost. Condition The unit does not operate. Cause What to do Has the power supply cord been disconnected? Plug the power supply cord into the outlet. Is the “ ” lamp blinking?(The tank is full or in a wrong position.) Discard the water in the drainage tank, and then reposition the tank. Is the temperature of the room above 38 or below 2 .
Maintenance The dehumidifying function does not work. No air is discharged. Is the air filter clogged? Clean the air filter as instructed under “Caring for the dehumidifier”. Is air intake port or discharge port obstructed? Remove whatever is obstructing the discharge port or intake port. Is the air filter clogged? Clean the air filter as instructed under “Caring for the dehumidifier”. Has the unit been poorly installed so it is tilted or unsteady? Use the unit in a stable, sturdy location.
Maintenance Removing breakdowns The following symptoms do not indicate a breakdown Symptom Reason The operation noise suddenly increases during use. The operation noise increases when the compressor is activated. The humidity do not drop. Is the room too big for the unit? Are windows or doors opened and closed frequently? Is there a device in the room such as a kerosene stove, which emits steam? Very little dehumidifying takes place, or none takes place.
Maintenance The unit echoes. If the unit is used in a room with wood flooring or in a small room, it may echo. When operation is started or the operation mode is changed, an unusual noise is heard in main unit. The refrigerant may take some sound until circulation stabilizes. There are some stains left in the drainage tank. This is water left from the dehumidifying test conducted at the factory, it does not indicate a problem.
APPENDIX Electric Schematic Diagram - 18 - E3cf0029.
