Service manual

79
4.2.3 Floor ceiling type
Remove panel grating module
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly. Do not put lter screen
near the high temperature heat source.
Step Illustration Handling Instruction
Remove sub-assy of
front grill
●Move down the clip of the
sub-assy of fromt grill until
the front grill is open. (As is
shown in the graph, arrow
represents the position of
bottons. There are two clips
for each grating.)
Remove right and left nishing plates
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly. Do not scratch the outer parts.
Step Illustration Handling Instruction
Remove right and
left nishing plates
●Remove the screws as
shown in the graph with
screwdriver and then push
upward to remove the right
and left nishing plates.(As
is shown in the graph, arrow
represents the position of
screws.)
Remove right and
left nishing plates
●Remove the screws as
shown in the graph with
screwdriver and then push
upward to remove the right
and left nishing plates.(As
is shown in the graph, arrow
represents the position of
screws.)
77