2X Series USER MANUAL Printing 3
3 1. Printing Printing User can print printables via USB flash drive, USB cable, or over the network. The following on the printer means it is ready to start print. 1.1 Printing from USB Flash Drive 1 Connecting USB flash drive to the printer. In order to print using an USB flash drive, insert the flash drive into the USB port. When the USB flash drive is connected while in the home screen, a list of files in the USB appears.
Printing 3 2 Printing Files Select a file to print in the USB list. 3 Print Preview Once selected, a preview of the model appears on the screen.
3 Printing 4 Printing Once [ ] is pressed the nozzle starts to be heated. When the specified temperature is reached, the printing starts. 5 Pausing Print Pressing [ Press [ 3-4 ] during a print will pause the progress. ] again and nozzle is heated again, and the printer will continue printing.
Printing 3 6 Additional Functions of Pausing Press the [ ] button during printing to pause it, and then press the [Setting] icon to run additional functions. These additional functions include [Bed Height Adjustment], [Extruder], and [Cartridge-Load, Unload, and Unlock]. These additional functions are used for any mechanical problem or if the user needs them. ▣ Bed Height Adjustment ① This menu is used to adjust the height of the bed during printing for a high-quality outcome.
3 Printing ▣ Extruder It functions just like the extruder operation in your printer’s settings. ▣ Cartridge The cartridge can be loaded, unloaded, or unlocked during printing. 7 Exchanging Cartridge during print Press [Change] to switch the currently using cartridge into a different cartridge.
3 Printing 8 Print Cancelation During print pressing [ ] button a message pops up and asks for confirmation on the print canceling. When confirmed, the rest printing job is canceled. Another message requesting the removable of left print will popup press [OK] and screen will return to home screen. 9 Printing Completion After printing has completed, follow the instructions and remove the printed product. Press the [OK] to return to home screen.
3 1.2 Printing Printing Via PC 1 Prepare PC connected to the same network where the printer is connected to. 2 Run 3DWOX Slicer program. 3 Press the “Print” button. 4 Following Steps (Same as steps 3~9 of printing via USB) Note - Pause, print cancelation, please refer to P.3-2 Printing from USB Flash Drive section. 1.3 CLOUD Printing To begin using the Cloud Print function, users must register the printer to the server.
Printing 3 2 When using [CLOUD] for the first time, users must register their printer. * Alexa and Sindoh Cloud Slicer app share Printer registration information. 3 [Generate Code] allows you to connect the device with the account of the user registered in the App. If there is a user registered on the device, [Registered Users] appears, listing the registered users and deleting them by clicking the [ - ] button.
3 Printing 4 When the print job is sent to the printer registered in the app, a menu called [Print Queue] appears, and the names of the sender and the transmitted print job are displayed in the list when the menu is entered. The transferred print job can be deleted with the [ - ] button.
Printing 3 6 [Printer Detail] menu lets users check the printer information. 7 [Edit Printer] menu lets users change the [Display name].
3 Printing 8 [Deregister Printer] menu lets users delete the registered printer in the server. * If users delete the printer information, the [Print queue] list and the registered user list will be initialized. * If users want to use the [CLOUD] function again after deletion, printer must be re-registered in the server. 1.4 Print Job Management You can manage print jobs in queue. 1 Press the [Queue] button on the upper left hand corner while printing.
Printing 3 2 The print jobs in queue are listed. 3 You may click the list to look at the information of the print job and delete it if necessary.
3 Printing 1.5 Printing with Two Types of Filaments 1 Two nozzles can cross print the same material. - PLA & PLA - ABS & ABS 2 Two nozzles can cross print the same material. - PLA and PVA(PVA+) 1.6 PLA ABS FLEX PVA(PVA+) PLA O X X O ABS X O X X FLEX X X X X PVA(PVA+) O X X X Changing Filaments To prevent clogging of the nozzle when switching from the used filament to different material filament, you must perform Nozzle Cleaning.
2X Series USER MANUAL Printed Output Check 4
4 Printable Verification 1. Printed Output Check 1.1 Detaching Printed Output To safely detach the printed model, first let the bed cool down. Bed top plates must be detached as well. Caution Hot Surface - Without sufficient cooling the bed can be very hot. Please be cautious coming into contact . It may cause burns. 1 Cooling the Bed After the printer has finished printing, check the LCD screen and built-in speaker. Wait until temperature goes below 50ºC or 122ºF.
4 Printable Verification Detach the object from the Flexible Bed. The object can be easily detached by bending the Flexible Bed up and down. Using the scrapper provided with the printer will be useful. Be careful not to apply too much pressure while using the scrapper could damage the bed sheet and the bed. Depending on the filament material the printed output may easily break or damage, please be cautious.
4 1.2 Printable Verification PVA Filament Removal Guide 1 After printing a model with PVA supports, Detach the printed output from the bed, and then soak it in water. Once it’s soaked in water, the PVA support will get dissolved. - If the water is warm, the dissolution time can be shorten. Make sure to keep the water temperature doesnot exceed 35°C; otherwise, the shape of the PLA can be deformed due to hot temperature..
Printable Verification 2. 4 When Printer Cannot be Turned On 1 Open the Front door shown below and turn the belt counter-clockwis. 2 After the bed is lowered, remove printed output and turn the power on.
4 3. Printable Verification If problems persist 1 Please visit https://3dprinter.sindoh.com.
